equivalent stiffness

网络  等效刚度; 当量刚度

电力



双语例句

  1. Method to Analyze Wrinkled Membranes by Using Local Coordinate Transpose and Equivalent Stiffness
    使有褶弄出皱褶或饰边褶皱膜的局部坐标系转置和刚度等效法分析
  2. Computing Methods of the Equivalent Stiffness of the Interior Bracing and the Penetration Depth in Rock of Rock-Socketed Piles for Deep Excavation
    深基坑内支撑等效刚度及嵌岩支护桩嵌岩深度计算方法研究
  3. The computing methods of the equivalent stiffness of the interior bracing and the penetration depth in rock of the rock-socketed pile for deep excavation are two of these problems to be investigated.
    深基坑内支撑结构等效刚度和嵌岩支护桩嵌岩深度的计算即是需要进一步深入研究的两个问题。
  4. Calculating formulas for equivalent stiffness and stability of curved bar simply supported at both ends
    两端简支弯曲杆件的等效刚度、稳定性计算公式
  5. BP Neural Network-Based Prediction of the Equivalent Stiffness Coefficient of the Rolling Mill
    基于BP神经网络的轧机当量刚度系数的研究
  6. Analysis on Influencing Factors for Computing the Equivalent Stiffness of the Interior Bracing of Deep Excavation by Numerical Method
    深基坑内支撑等效刚度数值计算影响因素分析
  7. Application of equivalent stiffness pillar method to calculating the single hinge bent structure with varying span
    用等效刚度柱法求具有跨变的单层铰接排架结构
  8. The equivalent stiffness was expressed in piecewise as a cubic stiffness and a linear stiffness through data fitting.
    利用数据拟合将该等效刚度分段表示为三次非线性刚度和线性刚度;
  9. A Method of Calculating Equivalent Stiffness of Wire-Rope Isolators
    钢丝绳隔振器等效刚度的一种分析计算方法
  10. Ultimately, a coefficient of the equivalent stiffness is introduced.
    了解了多杆件极限承载力的特点,引入了受损杆件的折算刚度系数。
  11. Various lattice flat shells consisting of lamella arch system are studied in the paper. The general differential equations of lattice flat shells for the displacement method and the combined method, and the formulas for calculating equivalent stiffness are given.
    本文对各种交叉拱系组成的网状扁壳进行了分析研究,给出了网状扁壳的位移法及混合法的一般方程式和等代刚度的计算公式。
  12. According to hysteresis curve of each test step, the equivalent stiffness and the equivalent viscous damping ratio were calculated, and the calculation formula of the equivalent stiffness was put forward.
    根据试验所得各个工况的滞回曲线,计算了铅芯橡胶阻尼器的等效刚度和等效粘滞阻尼比,并提出了其等效刚度的计算公式。
  13. In chapter four, equivalent viscous damp and equivalent stiffness are obtained by using equivalent linearized method;
    本文的第四章运用等效线性化方法得到了结构的等效阻尼及等效刚度,在此基础上提出了钢框架弹塑性随机地震反应分析的随机振型分解法。
  14. According to fracture mechanics and plane stress, a method of estimating the equivalent stiffness of a bending blade with the crack is presented in this paper, in which, the crack is regarded as a spring.
    根据断裂力学和平面应力理论,以一具有旋转柔性的弹性铰等效叶片裂纹为例导出了裂纹截面弯曲等效刚度的计算方法。
  15. Research on the Equivalent Stiffness Coefficient and Damping Coefficient of Fixed Joints in Machine Tools
    机床固定结合面等效刚度系数和阻尼系数的研究
  16. So, it can not only reveal the changes of the equivalent stiffness and damping coefficients of the cutting process, but also analyze the effects of cutting parameters on the chatter amplitude and frequency.
    该法不仅可揭示切削过程等效刚度系数和等效阻尼系数的变化,而且还可考察各切削参数对颤振频率和振幅的影响。
  17. The relation between free-vibration frequency of single-layer reticulated shell and equivalent stiffness is found.
    从而找到单层球面网壳的自振频率与等效刚度的关系。
  18. Subsequently, the angular amplitude of the foundation, the equivalent stiffness and damping coefficients of the soil are expressed explicitly.
    给出了基础的角位移幅值,地基的等效刚度系数和等效阻尼系数的表达式。
  19. Because of the electromagnetic bearing having the characteristics such as controllable stiffness and damping, the parameters of its control system can be selected through the use of the concepts such as equivalent stiffness and damping. Thus, the design process can be simplified.
    由于电磁悬浮轴承具有可控刚度和阻尼特性,因此可利用等效刚度和等效阻尼概念选择控制系统参数,简化设计过程。
  20. The equivalent stiffness and damping which are the parameters of the base shear method are got by the method of static condensation.
    采用静力凝聚法,得出底部剪力法中参数&等效刚度及阻尼。
  21. Then we can get test data from different amplitude, frequency and combination of specimen size. Due to this data we can calculate the damping ratio and equivalent stiffness under different amplitude, frequency and specimen size.
    得到在不同的振幅、频率和试件尺寸组合的方案下的试验检测数据,从而计算出不同频率、振幅和试件尺寸的铅板阻尼器的阻尼器比和等效刚度。
  22. The relational expression of additional damping ratio and stiffness of viscoelastic fixed in energy systems is established on the basis of pertinence between equivalent stiffness and damping coefficient of viscoelastic dampers.
    根据粘弹性阻尼器等效刚度和阻尼系数的相关性,建立了粘弹性阻尼器在消能体系中附加阻尼比与其附加刚度的关系式。
  23. The proposed method can avoid solving the inverse of time-varying equivalent stiffness matrix in each time step of Newmark method, thus reducing the computational efforts.
    该方法避免了在使用Newmark法时对每个时间步中时变的等效刚度阵进行矩阵求逆,从而减少计算工作量。
  24. In the previous study the single freedom system is more considered, and the equivalent Stiffness and equivalent damp is got by using linearized model and spectrum analysis.
    在以往的研究中多集中在单自由度系统中,通过线性简化方法,使用谱分析得出铅芯橡胶支座的等效刚度和等效阻尼比。
  25. The springs with equivalent stiffness are used to replace the affection of surrounding soil.
    设定周围土介质对防渗墙的影响可采用具有等效刚度的弹簧来代替,决定等效刚度所需要的参数都由现场实测得到。
  26. In the parametric analysis, the effects of the pile stiffness, pile slenderness and pile spacing on the equivalent stiffness and load distribution of pile group characteristics were investigated.
    在参数分析中,研究了桩身刚度、桩长细比和桩间距对群桩等效刚度以及群桩中各桩桩顶荷载分担特性的影响。
  27. Based on the complex stiffness, the stiffness and damping properties were systematically and theoretically analyzed employing different parameters including equivalent stiffness, loss factor, equivalent damping coefficient and equivalent damping ratio.
    基于复刚度,采用等效刚度、损耗系数、等效阻尼系数和等效阻尼比等特性参数对其刚度和阻尼特性进行了系统的理论分析。
  28. The equivalent linearization is used to simulate the elastoplastic hysteresis loops of the flexible connecting bearing, and the corresponding equivalent stiffness and equivalent damping of the bearing are obtained. 3.
    对柔性连接支座的粘弹塑性滞回曲线进行等效线性化,得出相应的等效支座刚度和等效支座阻尼。
  29. Analyzing how brace stiffness 、 equivalent stiffness, equivalent mass, equivalent damping ratio influence the energy dissipation device.
    分析了支撑刚度、土体等效刚度、土体等效质量、土体等效阻尼等参数对耗能减震器减震性能的影响。